The Classic Barn Door Set

Description

Hardware kit for a single sliding wood door

The Classic Barn Door is a wall mount sliding door system for 1 wood door with visible black flat bar steel top mount trolley for doors weighing up to 80 kg (176 lb). Select from 3 choices of standard flat bar upper track sets with wall mounts and fastener lag bolts for wood wall construction. Each track is pre-drilled for connectors to join tracks and soft-close mechanisms (sold separately). For residential applications.

Instructions Line Art (1) Line Art (2)

ADVANTAGES AND BENEFITS
The rails are available in three different lengths allowing you to install two doors side-to-side. Rails are pre-drilled to allow you to connect them end-to-end using the connector kit and to allow installation of end-rail bumpers.

Security: Each roller is equipped with a device that prevents derailment when the door is being misused.

INCLUDED PRODUCT(S)

• 2 roller units with screws for 1-3/8″ or 1-3/4″ door
• 2 end bumpers with screws
• 2 anti-derailer units with screws
• 1 floor-level guide for wood door.

IMPORTANT INFORMATION
Note: Picture for visual reference only. Actual product may vary from that shown in photo. Be sure to order hardware before beginning fabrication or installation work. It is preferable to use instructions inside the manufacturer-provided packaging.

Manufacturer reserves the right modify the product and information relating to that product without prior notice. All technical drawings and documents contain examples for the assembly of different supplier hardware. Customer cannot derive any claims from the use of these documents. No responsibility is assumed for design details relating to the construction or project.

Job execution or installation must be done by qualified persons. Ensure that product is correctly installed and anchored using anchors that are appropriate to the material. Never exceed manufacturer-recommended dimensions or weight. Never use an aerosol lubricant on this product. Always use a soft dry cloth to remove dust, debris and wood or aluminum filings from the rail before installing the rollers.